In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace

A fireplace in the wall gives a sleek and polished look without the cost of mantles. It is one of the easiest electric fireplaces to install.

There are some things to consider before buying an in-wall fireplace. Follow these guidelines to get the most out of your investment.

Height

Although it might seem like something that is easy but determining the height of your fireplace is one of the most important decisions you make. The height of your fireplace will influence everything, from how well it fits into a room to its visibility. Your fireplace could look strange in the event that it is set too high. It will also diminish its beauty. On the other hand, having your fireplace too low will cause it to disappear in the wall space.

Electric fireplaces can be placed at various levels. For instance, a majority of people choose to mount their fireplaces on the eye level from a seated position. This requires a height between 40 and 42 inches. Some people place their fireplaces beneath their TVs. This is an attractive alternative.

The height of your fireplace will depend on a few things, including the dimensions of the room as well as the length of the wall where you want to mount it. The bigger a room larger, the more spacious it can be and it could mean that you can fit a bigger fireplace in it. The same goes for the length of the wall, since a longer wall can support a wider fireplace.

Another important factor to consider is how you plan to make use of your fireplace. If you are planning to use it for decorative purposes, then it is recommended to choose a lower height. However, if you plan to heat your home with it, you'll need ensure that the fireplace is tall enough to meet local codes and safety standards.

It is important to choose the appropriate size for your fireplace to ensure that it will match your decor and be simple to clean or fill. It is always a good idea to ask a professional fireplace installer to assist you if are unsure about the height you should choose. They can advise on the best height for your fireplace based on their knowledge and your home.

Depth

It is crucial to know the depth of a fireplace, especially if you plan to install it in a recessed position. If you are going to cut through your wall, ensure that you have enough depth to accommodate the inner design of your fireplace (the smoke shelf area above the fireplace, the flue that is able to rise through the roof and the fireplace itself). Also, think about the space you'll need for the surround, and whether or not you want a mantle.

A lot of the latest electric models of fireplaces electric have a depth that is nearly concealed, creating the appearance of a "built-in" look. This type of wall fireplace made from electric is best exemplified by the Panorama BI Deep series. This model has a 5.8-inch deep frame that lets the viewer view the flames and ember bed and not the frame. It is also equipped with a range of media options, including natural-looking driftwood logs that look like driftwood white pebbles, crystals made of clear glass that reflect the flames and improve the ember bed.

Wall-mounted gas fireplaces are also available in shallow and deep models. When deciding the depth of your fireplace it is crucial to keep in mind that these units are supplemental heating sources and must be properly vented by a trained professional. When determining the size of a gas fireplace you must consider the length of the vent pipe and the size of the chimney.

If you decide to go with a surface mount or recess-mounted installation, it is crucial to read and adhere to the manufacturer's instructions when installing your fireplace. A professional installer is recommended in most instances. It is also recommended to have an additional person on hand when installing a gas fireplace.

A fireplace built into the wall of your home can be an great way to boost its value and add some ambiance to your living spaces. It also can reduce your heating costs. Furthermore, it's an ideal option if aren't able to install an old-fashioned fireplace into your home due to the space restrictions or the location of your existing chimney.

Surface Mount

Surface mounts are a great option if you don't wish to or aren't able to cut into the wall to mount an electric fireplace. They also provide a sleek, built-in appearance. Some models, such as the Allusion line, can be mounted partially recessed in the wall without compromising aesthetics or heat output.

To begin the installation begin by marking the wall with a pencil on the wall where the bracket is to be mounted. Use a stud-finder for locating the studs and then place each bracket in front of at least one stud for stability. If a stud is not reached or isn't suitable for your fireplace, you could use drywall anchors to provide support.

Once you have determined the position of the mounting brackets on the wall using a power drill, you can use it to screw them in and make sure they are properly aligned with the studs. You can use studs or plastic anchors to connect each bracket. Once the mounting brackets are installed, lift the fireplace and hang it from the bracket. Once it's secure, check the position of your fireplace to make sure that it is straight and not crooked within the opening.

Before you begin the installation, plug your fireplace in and make sure that all functions function properly. Light the fire, experiment with the flames, the heat, ember bed lights and other features. When you're satisfied with the results, it's time to install your floating mantel.

Depending on your fireplace's model It is possible to connect the wire connection to the appliance connector at the lower part of the mantel or if it has slots or hooks connected to the slots on the brackets for mounting. Once you've done this then, refer to the owner's manual for specific directions for removing the glass front panel and inserting it into the opening.

If you want to adjust the height and width, you should replace the glass front after you have removed the front panel. If your fireplace comes with ember bed media, spread it out across the top of the grate to give it a an organic appearance, then secure it in place by using the screws that come with it.

Plug-In

Electric fireplaces don't require vents or chimneys like traditional wood-burning ones. They plug into standard outlets and provide additional heating for rooms that are that are up to 400 square feet in size. You can also customize the ambience with a variety of flame and heat settings. Some models come with LED lighting effects that enhance the ember bed and the fire. Other models include an upper grille grate that hides manual controls but easily pops open to reveal buttons to set the desired setting.

Electric fire places with plug-ins can be mounted directly on the wall or recessed to create a built-in appearance. These fireplaces are usually more straightforward to install than mantel fireplaces. Some units come with a pedestal to allow you place the fireplace on flat surfaces, such as a buffet or dresser. Included are a remote control, mounting hardware and log set. Depending on the model, these electric fireplaces can include heating and flame options that can be switched off for year-round ambiance.

Some models have privacy glass which can be changed in a flash, from being fully transparent to partially transparent. This feature makes these models popular for walls that divide common spaces for entertainment, such as living and dining areas. They can even be used in bedrooms where adding the fireplace is an affordable way to cool a room without sacrificing privacy.

Plug-in electric fire places don't require hardwiring however they must be installed in an area that is able to support their weight. Certain models come with a kit that includes a pre-wired cord as well as a special bracket that makes the installation process easier. This kit is suitable for construction of drywall or concrete.

When choosing a location for your wall mount electric fireplace, ensure it's near an electrical outlet. Based on the model that you choose, plug-in electric fireplaces may be connected to outlets that are on the same circuit or a separate one for your electric fireplace. It is recommended to use an exclusive circuit to ensure that nothing else in your home will be operating on the same voltage and potentially trip your circuit breaker.